How to Change Default Web Browser in Windows 10 in less than a minute

Microsoft Edge is the default web browser in Windows 10 when you upgrade, even if you had it set to Chrome or Firefox. While the Edge browser is much faster and intuitive than Internet Explorer, there are features that are missing. Namely the ability to use popular addons or extensions that are available in other browsers like Chrome or Firefox.


When you upgrade to Windows 10, you may inadvertently reset your default browser to Microsoft Edge. Follow these steps to change a default browser back to Firefox.


Step 1. Go to Action Center by clicking the notification icon, then All Settings.

Step 2. Go to System -> Default Apps

Step 3. Select your desired browser  sample Firefox then click save Done  less a minute!.

How To Fix Error Message 'The Windows Security Center service can’t be started'

If you receive a "The Windows Security Center service can’t be started" error message in Windows 10, Windows 8, Windows 7 or Windows Vista, then this article may be able to help you troubleshoot the problem. You may try these troubleshooting steps in any order.

Action Center, previously known as Windows Security Center, monitors the security status of the computer. However the related service is called Security Center service. The Security Center (WSCSVC) Service monitors and reports security health settings on the computer.

The Windows Security Center uses the Windows Management Instrumentation or WMI collect information about the PC. If there are some inconsistencies, the Security Center may fail to start.

What cause this? May be you have downloaded a program with virus, Trojan, rat, or malware or you turned it off.

The Windows Security Center service can’t be started

1) First of all, deep-scan your PC with your security software. This is to ensure that, it is not some malware, which is preventing your Security Center from running.

2) Disable and then enable Security Center and see if it helps.

3) If your Security Center is disabled, open Control Panel\All Control Panel Items\Action Center and see if you can restart the Windows Security Service by clicking on the Turn on now button.

4) If this does not help or you receive another error, right click any where on your task bar click Task Manager ( or run task manager)

Click the "Services" tab menu , then click "Open Services"

Look for " Security Center" (you can see it was Disabled) then right click it select properties.

Set on Automatic or Automatic (Delayed Start). Also ensure that the Remote Procedure Call (RPC) and Windows Management Instrumentation services are started and set on Automatic.

Fix?

New Windows key shortcuts in Windows 10

Microsoft has added several new Windows key shortcuts in Windows 10, and they’re especially important if you want to snap programs side-by-side on a single display, manage multiple monitors, or juggle several Virtual Desktops. Taking a moment to print or save these shortcuts could save you lots of time in the long run. 

There are 42 shortcuts in total, mostly dealing with window management, the Start menu, the Task view, and Cortana. Keep in mind the list only includes Windows key shortcuts, not shortcuts involving Ctrl or Alt.

This guide lists shortcut keys that you can use from the desktop in Windows 10.

You can also download MS docx Format : 
https://www.microsoft.com/en-us/download/details.aspx?id=48716

How to reset Bios Password

Do you experience this  Password on Bios while reformatting  a Computer or Laptop? It such annoying like someone who just lend a Laptop then they  put a password on it !

How to remove it ?  every computer has a battery to supply the cmos , bios , Time and Date.

You just need to remove it or find a cmos /bios jumper to clear it.

Computer cmos battery is a small round  like penny.  you just remove it and power on the computer to reset , In desktop computer you need to set the Jumper to clear.

Remove the cmos battery and switch on your laptop go to bios now its clear , You need to set the time and date at present.

NOTE: In some cases  latest hardware are more secured and resetting is not enought to remove hardware password.

How to uninstall your DeepFreeze if forgot your password

What if, you install Deep Freeze and forgot your password, so now you  can't uninstall your DeepFreeze ?

Deep Freeze is a good program if you want to keep your system secure, but it can be a Real pain if YOUR FORGOT you’re no longer using it and want it off your system. Before you can uninstall Deep Freeze, you have to disable it. To disable it, you’ll need the password.

This  Trick will work on  WORKS fine with  v7.00.020.3172 build  and below.

1. First you should know what is your DeepFreeze Version (very important)

2. Press this on your Keyboard  CTRL + ALT + SHIFT + F6  

DeepFreeze Log in will show something like this.. Take note the version

3. You Need  to download your Deep Freeze version Installer  for uninstall (if you already have the one you install on your PC no need to download  ) If you no longer have the installation file, you can download it again from the Deep Freeze website.

4. Download Anti Deep Freeze Tool

5. If you have Version 1 to 6  use the   ADF.exe , for  Version 7  use the ADF 7.exe

NOTE: Sometimes your Anti Virus detect malware please  disabled  before opening this too

6. For ADF 7  click  "Open new process" which is recommended  then click  start.

Now you can log in without password  then click  thawed  the apply and reboot  NEW PASSWORD is 123

Works  both on XP and Win 7

Your Deep Freeze ICON  status should have X indication it was disabled.

7. There is no uninstall file for Deep Freeze. Instead, you will need to run the file that installed the program to begin with. If you no longer have the installation file, you can download it again from the Deep Freeze website.

The Installer  itself is the  uninstaller  LOL.

    The file for Deep Freeze 5 is typically: DF5Std.exe
    The file for Deep Freeze 6 is typically: DF6Std.exe
    The file for Deep Freeze 6 is typically: DF7Std.exe

8. After Uninstall  Reboot your PC  and your Done!.



For Deep Freeze evaluations (with no License Key entered):

•     Restart the computer.
•     Enter the system BIOS settings.
•     Advance the clock by at least 60 days and then restart your computer. This will disable the software.
•     After the system has started, run the Deep Freeze installation program to uninstall Deep Freeze.
•     After the computer reboots, re-enter the BIOS and reset the clock to the current date. You can then re-install Deep Freeze after restarting.

How to fix error access in PLDT Fibr Default Gateway

How to fix error access in PLDT Fibr Default Gateway

Someone message me that he can no longer access the PLDT Fibr Default Gateway after multiple change WiFi password.

I told her that she should press and hold the reset button for 1 to 2 minutes, but still after he done it  she can no longer.

Fibr Default IP  is 192.168.1.1
PLDT Fibr user : adminpldt
PLDT Fibr password: 1234567890

Other PLDT Fibr Modem Default User login
User: telecomadmin      User: admintelecom


Well this is new or similar to CD R King Modem if there is Internet connection exist you can not access the default  IP gateway.

Here is screen shoot she provided :

The only solution here is to unplug the cable internet ( the source of connection) on the modem. Then plug the modem with NO internet so you can access again the Default Gateway 192.168.1.1

How to remove blogger navigation bar in just 3 Step

By default, Google’s blogger blog comes with navbar enabled which is located at the top of blogger template. You can choose different colors for navbar that suits your template design. If you browse most of the blogger powered blogs, you might notice the absence of navbar in their template. Either they must had removed the navigation bar or using custom/third party templates.
If you are a beginner blogger who wants to remove/disable navbar from blogger themes, I will show you on how to do it. Before continuing, you might need to know the advantages and disadvantages of the navbar and then decide whether removing navbar from your template is good or not.

Step 1. Log in to your Blogger account, click on your blog and head to the 'Layout' tab >
Step 2. look for the 'Navbar' heading and click on the Edit link as shown in this picture:
Step 3. When the pop-up window appears, scroll down and select 'Off', then click the Save button: And that's it!

Solution Error on installing Dell 365 Bluetooth on Windows 10

I got error on installing Dell 365 Bluetooth on Windows 10 because it don't not have Generic Driver for Dell Bluetooth I read about some problem on Insider.

But  I found out  that Dell has removed Windows 8 and Windows 10 support in some old Windows 7 laptops like N5030  that is my Laptop model.

Dell wireless 365,370,380 Bluetooth module is the most common Bluetooth device that Dell uses. Its normally supports Widdcom Bluetooth driver  which is manufactured by Broadcom and Modified by Dell .

But fortunately the Windows 7 drivers are working fine on Windows 8 and Windows 10, and most of them are installed during the windows installation.

But the main problem is the Bluetooth driver (Dell Wireless 3XX module).

Because of that Dell 365 Bluetooth Module  Windows 7 are not compatible on Windows 8... so it mean  you can not install it too on Windows 10.

Broadcom has released their Bluetooth driver for Windows 8 PRO the  "Broadcom Bluetooth 4.0" driver has  support for a lot of Bluetooth devices and Dell Wireless  3XX Bluetooth module is in the support list.....But as Broadcom don't provide drivers directly to customers.... they give it to the system manufacturers like Dell, Lenovo, HP, etc. and the modify it for ease of their customers.

And  Sadly  Dell has removed Windows 8  to Windows 10 support for old model.

So here is the Broadcom Bluetooth 4.0 driver from Lenovo site which is running fine on Dell 365 Bluetooth  device without any compatibility issue.

And also you can use Bluetooth Control Panel as you do in Windows 7.

Gmail Tips & Tricks

Tips & Tricks

Check out the tips below to help you get started with Gmail.

Check out the categories in your inbox

Your emails are automatically organized into tabs. For example, an email about a sale from a shopping site can be found in the "Promotions" tab.
Learn more about inbox categories.

Choose a theme for your inbox

You can choose an image for your inbox background. To get started, click Settings Themes.
Learn more about inbox themes.

Find your emails

Use the Search box to quickly find your emails. Inside the search box, click the Down arrow to filter your results .
Learn more about search in Gmail.

Organize your emails with labels

Labels are like folders, but you can add more than one label to a message. To add a label to an email, select the email, then click Labels . The label will be shown next to the email.
Learn more about labels.

Open & download attachments

You'll see a preview of attachments sent to you at the bottom of your email. Click the preview to see the attachment, download it, print it, and more.
Learn more about opening & downloading attachments.

Undo sending a message

Turn on Undo Send to get extra time to look at an email before it gets delivered.
Learn more about sending & unsending emails.

Automatically manage incoming emails

Filters can do things like automatically label, archive, delete, star, and forward your incoming emails.
Learn more about creating rules to filter your emails.

Start a video call

When you add someone to your Hangouts chat list, you can start a video call with them from your inbox by hovering over their name and clicking Video call .
Learn more about video calls.

Check emails from all your accounts

If you use multiple accounts, you can check all your emails in Gmail. You can also send messages from an address that isn't your Gmail address.
Learn more about adding multiple accounts to Gmail.

Safe way to wash a Computer Motherboard

How  to wash a computer motherboard

What will happend when you clean a motherboard?

1. Motherboard with no Screen can be Fix  when washing .

2. Motherboard performance will be a speed as brand new.

3. When ever you want to sell your PC washing it is Good.

What are the things  must do?

1. Remove Cmos battery first

2. Use liqud detergent like Joy to wash your motherboard, mus not do it with powder because powder particle may sink to tiny opening and can damage your motherboard or shorted.

3. Dry it with blower or dryer gently again gently don't over heat.

4. If you dont have dryer put it under the sun with cardboard so it wont break or over heat(para di lumutong).

Solution on Google Cookies Opera Browser "We've detected a problem with your cookie settings"

ExpressTuts - Solution on Google  Cookies Opera Browser "We've detected a problem with your cookie settings" .

May you receive this Opera Error Message

"We've detected a problem with your cookie settings."
"Enable cookies" "Make sure your cookies are enabled. To enable cookies, follow these browser-specific instructions."
"Clear cache and cookies" "If you have cookies enabled but are still having trouble, clear your browser's cache and cookies."
"Adjust your privacy settings" "If clearing your cache and cookies doesn't resolve the problem, try adjusting your browser's privacy settings. If your settings are on high, manually add www.google.com to your list of allowed sites.

Now you cleared your browse for how many time and uninstall the opera getting the same message again and again?

How to Fix  Cookies Opera Browser "We've detected a problem with your cookie settings"

1. Go to Opera browser setting
2. Go to Privacy and Security
3. Now click All cookies and site data.
4. Now you will see cookies and how many user cookies do you found?
5. Solution is  Delete All  Cookies manually  which are not deleted  on CCleaner or other system tools.

 Try to login again if the error still there

How To Create Lazada Affiliate Banner in 20 seconds

Here is  easy guide how to setup Lazada  ads banner if you are a beginner Lazada Affiliates.

Create a Banner Code

1. Login Lazada Affiliate account 

2. Click the offers menu than click  Create Carousel Banner. see image below.

3. Select your Country and the your Category.

4. Select your banner layout ( number of display )

5. On the change banner size click the Guide 

For example: 

700x100  for long banner

300x250  square banner

6. Finally Get your banner then copy your code.

How to add banner code on blogger :

1. Login on your blogger account.

2. Now find and click "Layout", then click "ad a Gadget"

3.  On the Gadget select "HTML/JavaScript" paste your Lazada Banner there, save and your all set you can now see your banner ads on your site congrats

Unlocked Sim Globe

You can View the Step how to Unlocked  Sim here..
1. We need a SIM for G* Old or New SIM CARD.
2. TXT 222 for a balance Check or to Activate your New SIM.
3.Now check the validity of your SIM.

Name:
Number: 222

Content:
Your balance as of 01/07/2012 17:31 is P1.00 valid til 02/21/2012 19:41 w/ 35 FREE txts. Pls note that system time may vary from the time on ur phone.
Time: 07/01/2016 17:31:18

4.If your Sim is NOT valid LOAD 50php.
5.Now REG any Power Surf  Promo ( MB15, POWERSURF50 ) I prepared MB15 the cheapest.DON'T CONNECT YOUR DASHBOARD YET!
6.Connect your VPN with a working CONFIG (lport and remote port
7.Connect your broadband dashboard, and BROWSE if can Congrats!!
8.NO BROWSE? means its not unlocked Succesfull...STOP YOUR SUBSCRIPTION.
EX:
FOR MB15 TXT " PSURFMB STOP send to 8888"

Try and try mo :P
Tips: Don't do it at night 8888 is bz.

NOTE: Connect VPN first before you Broadband Facts:

Why we need to load and subcribs to their promo?

Ans: G* have a pocket data monitoring system so. by doing this.. there are few fragments left in your pocket  data Record.


Why we need to Load?
Ans: By reloading the validity of the SIM is extended. Load 50 and shared it to your mobile sim to prevent Load eaten by your internet provider